| 870810 |
Bumpers and parts thereof |
| 87081010 |
For the industrial assembly of:
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition intern |
| 8708101010 |
Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 |
| 8708109010 |
Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 |
| 870821 |
Other parts and accessories of bodies (including cabs) |
| 870821 |
Safety seat belts |
| 87082110 |
For the industrial assembly of:
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition intern |
| 870822 |
Front windscreens (windshields), rear windows and other windows specified in subheading note 1|to this chapter |
| 87082210 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 87082910 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 870830 |
Brakes and servo-brakes; parts thereof |
| 87083010 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 8708301020 |
Motor powered brake actuation unit
-|with a rating of 13.5|V (±0.5V) and
-|a ball screw mechanism to control brake fluid pressure in the master cylinder
for use in the manufacture of electric motor vehicles |
| 8708301040 |
Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 |
| 8708301060 |
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 |
| 8708301070 |
Ductile cast iron brake caliper jaw, of a |kind used in the manufacture of goods of Chapter 87 |
| 87083091 |
For disc brakes |
| 8708309120 |
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 |
| 8708309130 |
Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 |
| 8708309140 |
Ductile cast iron brake caliper jaw, of a |kind used in the manufacture of goods of Chapter 87 |
| 8708309160 |
Motor powered brake actuation unit
-|with a rating of 13.5|V (±0.5V) and
-|a ball screw mechanism to control brake fluid pressure in the master cylinder
for use in the manufacture of electric motor vehicles |
| 8708309910 |
Motor powered brake actuation unit -with a rating of 13.5 V (±0.5V) and -a ball screw mechanism to control brake fluid pressure in the master cylinderfor use in the manufacture of electric motor vehicles |
| 870840 |
Gear boxes and parts thereof |
| 87084020 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 8708402020 |
Automatic hydrodynamic gearbox
- with a hydraulic torque converter,
- without transfer box and cardan shaft,
- whether or not with front differential,
for use in the manufacture of motor vehicles of Chapter 87
|
| 8708402030 |
Automatic gearbox with a hydraulic torque converter with:
-|at least eight gears,
-|an engine torque of 300|Nm or more, and
-|transverse or longitudinal installation
for use in the manufacture of motor vehicles of heading 8703 |
| 8708402050 |
Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:
-cast aluminium body,-differential gear,
-2 electrical motors and gears,
with the dimensions of:
-a width of 280 mm or more but not |
| 8708402060 |
Automatic transmission assembly with rotary gear shifter with:
-aluminium casting housing,
-differential gear,
-9 Speed automatic,
-electronic range select gear selection system,
with dimensions of:
-a width of 330 mm or more but not more than 420 |
| 8708402070 |
Manual gearbox in cast aluminium housing for transverse installation with:
-a width of not more than 480 mm,
-a height of not more than 400 mm,
-a length of not more than 550 mm,
-five or six gears,
-a differential gear,
-an engine torque of 4 |
| 8708402080 |
Transmission gearbox without torque converter, with:
-dual clutch,
-7 or more forward gears,
-1 reverse gear,
-a maximum torque of 390 Nm,
-whether or not with electric motor integrated,
-a height of 480 mm or more but not more than 600 mm,
|
| 87084050 |
Gear boxes |
| 8708405010 |
Automatic hydrodynamic gearbox
- with a hydraulic torque converter,
- without transfer box and cardan shaft,
- whether or not with front differential,
for use in the manufacture of motor vehicles of Chapter 87
|
| 8708405040 |
Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:
-cast aluminium body,-differential gear,
-2 electrical motors and gears,
with the dimensions of:
-a width of 280 mm or more but not |
| 8708405050 |
Automatic transmission assembly with rotary gear shifter with:
-aluminium casting housing,
-differential gear,
-9 Speed automatic,
-electronic range select gear selection system,
with dimensions of:
-a width of 330 mm or more but not more than 420 |
| 8708405060 |
Manual gearbox in cast aluminium housing for transverse installation with:
-a width of not more than 480 mm,
-a height of not more than 400 mm,
-a length of not more than 550 mm,
-five or six gears,
-a differential gear,
-an engine torque of 4 |
| 87084091 |
Parts |
| 87084091 |
Of closed-die forged steel |
| 870850 |
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof |
| 87085020 |
For the industrial assembly of:
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition intern |
| 8708502015 |
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened |
| 8708502020 |
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
-|of a length of| 1|m or more but not more than 2|m,
-|of a weight of 6|kg or more but not more than 9|kg
|
| 8708502025 |
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external |
| 8708502035 |
Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67,0 mm or more but not more than 99,0 mm,
-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,
-an external spline with 21 teeth |
| 8708502045 |
Outboard constant velocity joint inner race, part of the vehicle's drive system, with:
-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,
-forged, turned, milled, broach |
| 8708502050 |
Double flange bearing of 3rd generation, for motor vehicles,
-|with double-row ball bearing,
-|whether or not with impulse (encoder) ring,
-|whether or not with antilock brake system (ABS) sensor,
-|whether or not with mounted screws,
for use in the m |
| 8708502055 |
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,
-forged, turned, broached and hardened
|
| 8708502060 |
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
- at least an actuator,
- whether or not an interior distribution |
| 8708502065 |
Intermediate steel shaft connecting the gearbox with semi-axle with:
-a length of 300 mm or more but not more than 650 mm,
-a spline end on both sides,
-whether or not with a pressed bearing in the case,
-whether or not with a holder
for use in the ma |
| 8708502070 |
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67,0 mm or more but not more than 84,5 mm,
-3 cold calibrated roller tracks with a diameter of |
| 8708502075 |
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,
-a |
| 87085035 |
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles |
| 87085055 |
Parts |
| 87085055 |
Of closed-die forged steel |
| 8708505520 |
Double flange bearing of 3rd generation, for motor vehicles,
-|with double-row ball bearing,
-|whether or not with impulse (encoder) ring,
-|whether or not with antilock brake system (ABS) sensor,
-|whether or not with mounted screws,
for use in the m |
| 8708505550 |
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened |
| 87085091 |
For non-driving axles |
| 8708509110 |
Double flange bearing of 3rd generation, for motor vehicles,
-|with double-row ball bearing,
-|whether or not with impulse (encoder) ring,
-|whether or not with antilock brake system (ABS) sensor,
-|whether or not with mounted screws,
for use in the m |
| 8708509910 |
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
-|of a length of| 1|m or more but not more than 2|m,
-|of a weight of 6|kg or more but not more than 9|kg
|
| 8708509915 |
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
- at least an actuator,
- whether or not an interior distribution |
| 8708509920 |
Intermediate steel shaft connecting the gearbox with semi-axle with:
-a length of 300 mm or more but not more than 650 mm,
-a spline end on both sides,
-whether or not with a pressed bearing in the case,
-whether or not with a holder
for use in the ma |
| 8708509925 |
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67,0 mm or more but not more than 84,5 mm,
-3 cold calibrated roller tracks with a diameter of |
| 8708509935 |
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,
-a |
| 8708509940 |
Double flange bearing of 3rd generation, for motor vehicles,
-|with double-row ball bearing,
-|whether or not with impulse (encoder) ring,
-|whether or not with antilock brake system (ABS) sensor,
-|whether or not with mounted screws,
for use in the m |
| 8708509945 |
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external |
| 8708509950 |
Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67,0 mm or more but not more than 99,0 mm,
-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,
-an external spline with 21 teeth |
| 8708509955 |
Outboard constant velocity joint inner race, part of the vehicle's drive system, with:
-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,
-forged, turned, milled, broach |
| 8708509960 |
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,
-forged, turned, broached and hardened
|
| 870870 |
Road wheels and parts and accessories thereof |
| 87087010 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 8708701015 |
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres |
| 8708701015 |
fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 |
| 8708701080 |
Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, for the industrial assembly of
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diese |
| 8708701080 |
fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 |
| 8708701092 |
fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 |
| 87087050 |
Wheels of aluminium; parts and accessories of wheels, of aluminium |
| 8708705015 |
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres |
| 8708705015 |
fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 |
| 8708705080 |
fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 |
| 87087091 |
Wheel centres in star form, cast in one piece, of iron or steel |
| 8708709115 |
fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 |
| 8708709920 |
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 |
| 8708709920 |
Road wheels of steel, whether or not with their accessories |
| 8708709980 |
Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for
- road tractors,
- motor vehicles for the transport of persons and/or the transport of goods,
- special purpose motor vehicles (for example, |
| 870880 |
Suspension systems and parts thereof (including shock-absorbers) |
| 87088020 |
For the industrial assembly of:
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition intern |
| 8708802010 |
Upper strut insulator containing
-|a metal holder with three mounting screws, and
-|a rubber bump
for use in the manufacture of goods of Chapter 87 |
| 87088035 |
Suspension shock-absorbers |
| 8708803510 |
Upper strut insulator containing
-|a metal holder with three mounting screws, and
-|a rubber bump
for use in the manufacture of goods of Chapter 87 |
| 87088055 |
Anti roll bars; other torsion bars |
| 87088091 |
Of closed-die forged steel |
| 8708809920 |
Aluminium suspension link arm, with dimensions of:
-a height of 50 mm or more but not more than 150 mm,
-a width of 10 mm or more but not more than 100 mm,
-a length of 100 mm or more but not more than 600 mm,
-a mass of 1000 g or more but not more th |
| 8708809930 |
Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:
-with a chrome coating,
-of a diameter of 11 mm or more, but not more than 28 mm,
-of a length of 80 mm or more, but not more than 600 mm,
with a |
| 870891 |
Other parts and accessories |
| 870891 |
Radiators and parts thereof |
| 87089120 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 8708912020 |
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 |
| 8708912030 |
Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with
-|an insulating area flatness of not more than 0,1|mm,
-|a permissible particle quantity of 0,3|mg per tan |
| 87089135 |
Radiators |
| 8708913510 |
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 |
| 8708913520 |
Turbocharger cooling duct containing:
-an aluminum alloy duct with at least one metal holder and at least two mounting holes,
-a rubber pipe with clips,
-a stainless steel flange highly resistant to corrosion [SUS430JIL],
for use in the manufacture |
| 87089191 |
Parts |
| 87089191 |
Of closed-die forged steel |
| 8708919930 |
Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with
-|an insulating area flatness of not more than 0,1|mm,
-|a permissible particle quantity of 0,3|mg per tan |
| 8708919940 |
Assembly for supplying compressed air, whether or not with a|resonator, comprising at least:
-|one solid aluminium tube whether or not with mounting bracket,
-|one flexible rubber hose, and
-|one metal clip
for use in the manufacture of goods of Cha |
| 870892 |
Silencers (mufflers) and exhaust pipes; parts thereof |
| 87089220 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 87089235 |
Silencers (mufflers) and exhaust pipes |
| 87089291 |
Parts |
| 87089291 |
Of closed-die forged steel |
| 8708929910 |
Exhaust system inner liner:
-with a wall thickness of 0,7 mm or more but not more than 1,3 mm,
-made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,
-whether or not with mounting holes
for use in the manufacture of |
| 8708929920 |
Pipe for guiding exhaust gases from the combustion engine:
-with a diameter of 40 mm or more but not more than 100 mm,
-with a length of 90 mm or more but not more than 410 mm,
-with a wall thickness of 0,7 mm or more but not more than 1,3 mm,
-of sta |
| 8708929930 |
Exhaust system end cover:
-with a wall thickness of 0,7 mm or more but not more than 1,3 mm,
-made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,
-whether or not with inner liner,
-whether or not with surface treatment
for use |
| 870893 |
Clutches and parts thereof |
| 87089310 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 8708931040 |
Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:
- cruise control reset,
- electronic parking brake release,
-start and stop engine management under Idle Stop and Go system (ISG),
for use |
| 8708939040 |
Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:
- cruise control reset,
- electronic parking brake release,
-start and stop engine management under Idle Stop and Go system (ISG),
for use |
| 870894 |
Steering wheels, steering columns and steering boxes; parts thereof |
| 87089420 |
For the industrial assembly of:
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition intern |
| 8708942010 |
Rack steering gear in aluminium housing with inner tie rod joints (axial joints) or with tie rods for use in the manufacture of goods of Chapter 87. |
| 87089435 |
Steering wheels, steering columns and steering boxes |
| 8708943520 |
Rack steering gear in aluminium housing with inner tie rod joints (axial joints) or with tie rods for use in the manufacture of goods of Chapter 87. |
| 87089491 |
Parts |
| 87089491 |
Of closed-die forged steel |
| 870895 |
Safety airbags with inflator system; parts thereof |
| 87089510 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 8708951020 |
Inflatable safety cushion| of high strength polyamide fibre:
-|sewn,
-|folded,
-|with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing
-|suitable for cool inflator technology
|
| 8708951030 |
Inflatable sewn safety cushion of high strength polyamide fibre:
-folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or
-flat safety cushion with or without thermal foldin |
| 87089591 |
Of closed-die forged steel |
| 8708959930 |
Inflatable safety cushion| of high strength polyamide fibre:
-|sewn,
-|folded,
-|with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing
-|suitable for cool inflator technology
|
| 8708959940 |
Inflatable sewn safety cushion of high strength polyamide fibre:
-folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or
-flat safety cushion with or without thermal foldin |
| 8708959950 |
Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more |
| 87089910 |
For the industrial assembly of:
Pedestrian-controlled tractors of subheading|8701|10;
Vehicles of heading|8703;
Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity no |
| 8708991025 |
Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles |
| 8708991055 |
Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conducto |
| 8708991060 |
Aluminium engine bracket, with dimensions of:
-height of more than 10 mm but not more than 200 mm,
-width of more than 10 mm but not more than 250 mm,
-length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made |
| 87089993 |
Of closed-die forged steel |
| 8708999718 |
Hydrostatic speed changer:
-with a hydro pump and a differential with wheel axle,
-whether or not with a fan impeller and/or a pulley,
for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90, whose main function is that of a la |
| 8708999722 |
Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conducto |
| 8708999728 |
A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:
-cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin |
| 8708999738 |
A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:
-made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbo |
| 8708999745 |
Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles |
| 8708999750 |
Aluminium engine bracket, with dimensions of:
-height of more than 10 mm but not more than 200 mm,
-width of more than 10 mm but not more than 250 mm,
-length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made |
| 8708999755 |
Assembly for supplying compressed air, whether or not with a|resonator, comprising at least:
-|one solid aluminium tube whether or not with mounting bracket,
-|one flexible rubber hose, and
-|one metal clip
for use in the manufacture of goods of Cha |
| 8708999775 |
Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 |
| 8708999785 |
Electroplated interior or exterior parts consisting of:
-|a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,
-|layers of copper, nickel and chromium
for use in the manufacturing of parts for motor vehicles o |